Storey County · Storey County, Nevada

Perc testing and septic soil evaluation in Six Mile Canyon, Nevada

Perc testing and septic soil testing in Six Mile Canyon, NV. Learn the local OWTS authority, field process, site constraints, and permit steps.

Discuss your property Call (951) 345-3509

Local project context

Planning septic soil testing in Six Mile Canyon

Six Mile Canyon parcels can combine narrow valley bottoms, concentrated drainage, steep side slopes, and historic disturbance. A site walk and topographic layout should identify safe, setback-compliant test areas before excavation.

The most accessible flat ground may also be a drainage path or the only practical driveway corridor. Primary and reserve fields must be evaluated with watercourses, grading, rock, and emergency access in view.

Local review

What reviewers need to resolve

Nevada DPBH provides residential environmental-health review for Storey County, with County building and planning coordination; commercial systems follow the NDEP path.

Nevada Division of Public and Behavioral Health Environmental Health provides residential ISDS health review in Storey County, with Storey County handling associated local building approvals. Commercial onsite sewage disposal systems are permitted through the Nevada Division of Environmental Protection Bureau of Water Pollution Control.

Visit the reviewing authority

01
Nevada's statewide ISDS rules establish the basic site-plan, soil-profile, percolation-test, primary-area, reserve-area, setback, and inspection framework. The local health or building authority supplies its current forms and can require added information for the parcel.
02
Residential and commercial paths are different. A house is normally reviewed through the identified residential health or county program; commercial onsite sewage disposal is generally handled through the Nevada Division of Environmental Protection and commonly requires Nevada PE design.
03
Sewer availability, mapped service areas, wells, watercourses, flood hazards, groundwater, bedrock, slope, and a full-size reserve absorption area should be checked before treating field testing as an isolated task.
04
Any Nevada engineering document that requires a professional engineer must be prepared, approved, and sealed under the responsible charge of a Nevada-licensed PE. Field testing and planning information do not replace that professional responsibility.

Soil and site conditions

What may influence percolation in Six Mile Canyon

The Comstock side of Storey County is defined by steep terrain, shallow rock, narrow construction areas, mine-era disturbance, and difficult access. Eastern canyon and river-influenced areas require a different flood, groundwater, and watercourse screen.

Industrial and multi-user work near the Tahoe-Reno Industrial Center may be commercial rather than a residential ISDS project and should be routed accordingly.

Questions to resolve at the property

Map washes and concentrated drainage before choosing test locations.
Evaluate historic disturbance, slope, rock, and safe excavation access.
Coordinate driveway and replacement-area geometry on constrained sites.

Percolation rate planning

Nevada design thresholds are not predicted neighborhood rates

NAC Chapter 444 uses measured minutes per inch to size and classify a system. Under the standard rules, very fast results are conservatively assigned a design value, slower results can trigger professional engineering, and extremely slow soil may require a variance or another approved path.

A measured result faster than 10 minutes per inch is generally designed as 10 minutes per inch under the standard method; rates faster than 2 minutes per inch can trigger engineering and added protection.
Soils slower than 60 minutes per inch require a professional engineer for the absorption system. A result slower than 120 minutes per inch is outside routine soil-absorption-trench eligibility, so the reviewing authority must determine whether an alternative, variance, or other permitted path is available.
The slowest representative result controls sizing, and soil profiles must also document groundwater, seasonal saturation, bedrock, and restrictive layers below the proposed system.

Important: Those values are regulatory decision points—not an expected range for a town. Only properly located field tests establish the result for a proposed absorption area.

From planning to results

How a percolation testing project works

The exact sequence depends on the reviewing authority and the property, but these are the usual stages from the first call through the agency-ready work product.

01
Confirm the authority and sewer question
We identify the residential health or county program, determine whether commercial NDEP review applies, and check sewer-service and special-jurisdiction questions.
02
Build the site-testing plan
The parcel, proposed use, water supply, building footprint, grading, access, wells, primary field, and equal-size reserve field are organized before excavation.
03
Excavate and document soil profiles
Representative explorations are logged for soil changes, restrictive layers, bedrock, groundwater, and signs of seasonal saturation at and below the proposed absorption depth.
04
Run the applicable perc procedure
Properly prepared holes are presoaked and measured using the fast or slow procedure required by the authority, with the field data retained for the submittal.
05
Translate results into the permit path
The slowest representative rate, site constraints, setbacks, and design flow are used to define conventional sizing or the need for engineering, a variance, or a different layout.

Site review

Information that can control an OWTS layout

A passing test result is only one part of septic planning. The proposed disposal area also has to fit the parcel, meet separation requirements, and preserve an acceptable replacement area when required.

Testing scope and system design should be confirmed against current agency requirements before excavation or construction begins.

Residential health authority, county building intake, commercial NDEP jurisdiction, and sewer availability
Complete primary and equal-size reserve absorption areas
Representative percolation tests and soil profiles at the proposed installation depth
Seasonal groundwater, mottling, bedrock, restrictive or highly permeable layers, and altered fill
Setbacks from wells, watercourses, property lines, structures, utilities, and other wastewater systems
Slope, floodplain, drainage, equipment access, and the relationship between the tested ground and final grading

If the site is constrained

Possible paths after field testing

Field results do not automatically choose a system. They help establish the conditions that the engineer, property owner, and reviewing agency must work with.

Standard absorption trenches

A conventional system may be feasible where the tested soil, separation, setbacks, slope, primary area, and reserve area meet the authority's requirements.

Reposition or enlarge the fields

Moving the structure or absorption areas, preserving more usable ground, or enlarging the field can respond to a slower rate or a localized site constraint.

Nevada-licensed PE design or alternative system

Slow soil, fast soil, shallow groundwater, rock, steep slope, flood concerns, or another limiting condition may require design under a Nevada-licensed PE, added setbacks, or an authority-approved alternative.

Variance, sewer, or revised project

Where the standard rules cannot be met, the authority may require a variance review, sewer connection, reduced development, or another permitted wastewater approach; none is automatic.

Property-owner questions

Percolation testing in Six Mile Canyon

Who reviews septic and percolation work in Six Mile Canyon?+

Nevada Division of Public and Behavioral Health with Storey County is the primary authority identified for this service area. The reviewing agency and required submittals should still be confirmed for the parcel before field work because jurisdiction, project type, and site history can affect the process.

Can Calicore predict the percolation rate for a Six Mile Canyon property before testing?+

No map or nearby result can establish the rate for a specific absorption area. Published soil and geologic information can help plan the investigation, but field observations and testing at the proposed location determine the result used for design.

What should I send before scheduling?+

Send the parcel address or APN, any site or grading plan, the proposed building use, available well and septic records, and agency comments you have received. If you only have contact information, Calicore can help identify the next step.

When does a Nevada septic project need a professional engineer?+

Nevada rules require engineering for several conditions, including absorption soil slower than 60 minutes per inch and many sites with limiting conditions. Commercial systems are generally under NDEP and commonly require design under a Nevada-licensed PE. The responsible authority confirms the project-specific requirement.

Verify current requirements

Official permitting references

These agency sources are provided for project planning. Requirements can change, and the current process should be confirmed for the specific parcel and proposed development.

Nevada Administrative Code Chapter 444 Nevada Legislature — State residential ISDS siting, testing, and design baseline.
Onsite Sewage Disposal System Program Nevada Division of Environmental Protection — Commercial and other NDEP-regulated onsite systems.
Storey County residential septic information Nevada Division of Public and Behavioral Health with Storey County

Related septic services

Continue from testing to a workable permit plan.

Percolation testing overview Soil testing for septic systems Septic and OWTS design

Start with the property

Not sure what the county needs?

Send the address or APN and whatever information you already have. Calicore can help identify the likely testing, planning, and submittal steps for your Six Mile Canyon project.

Ask about your site