Rice is a very small, remote desert locality at a former rail and highway junction west of the Colorado River corridor.
Sparse development, dry-lake and fan deposits, abandoned infrastructure, water-source feasibility, and long mobilization distances dominate project planning.
Local review
What reviewers need to resolve
Jurisdiction depends on the parcel. County EHS is the technical-review agency for unincorporated County work, while incorporated projects begin with the applicable city and may involve County EHS, a sewer district, and a Regional Water Board.
Rice is recognized in the Countywide Plan's East Desert group but has no municipal government or Census-place boundary.
The first step is confirming whether the parcel is inside city limits, in unincorporated San Bernardino County, or within a sewer or special-service area. Public-sewer availability can control whether a new onsite wastewater treatment system is allowed.
02
For County-reviewed work, Environmental Health Services requires advance notice before percolation testing and a report prepared by a qualified California professional. Incorporated-city projects may begin with the city and can involve the city, County EHS, a sewer district, and the applicable Regional Water Board.
03
The submittal must connect the measured rate to a workable site plan. Review includes the proposed use and design flow, test locations, soil profile, wells and watercourses, groundwater and bedrock evidence, slopes, setbacks, and space for both the primary system and a 100-percent replacement area.
04
County standards include larger disposal-area separation from the Colorado River; the applicable river, floodplain, groundwater, and jurisdiction requirements must be mapped for the parcel.
Soil and site conditions
What may influence percolation in Rice
River-adjacent parcels can combine permeable alluvium with shallow groundwater, floodplain limits, old channels, fine overbank deposits, and wells. Farther from the river, terraces and fans may be drier but still vary in soil texture, cementation, and rock content.
The mailing address may not identify the permitting path. City, County, tribal, federal, utility, and Colorado River Basin Water Board jurisdiction must be checked before a private wastewater scope is promised.
Questions to resolve at the property
Very sparse development
Abandoned infrastructure
Water-source feasibility
Dry-lake and fan deposits
Percolation rate planning
What a local percolation rate can—and cannot—tell you
San Bernardino County's published table converts measured leach-line rates from 1 through 120 minutes per inch into design application rates. A number alone does not establish approval: soil treatment, groundwater separation, slope, setbacks, reserve area, and the proposed development still control the design.
Coarse alluvium can absorb water quickly, but very fast results may require additional soil-fines and groundwater documentation rather than automatically producing a smaller or simpler system.
Fine-grained layers, caliche, cemented soils, weathered or intact rock, fill, and perched water can govern even when nearby ground appears sandy or open.
The County uses representative field results and the soil profile to establish a design rate; nearby tests and mapped soil descriptions are planning information, not a parcel result.
Important: There is no defensible town-wide expected MPI. Only testing in the proposed primary and reserve areas can establish the rate used for that parcel.
From planning to results
How a percolation testing project works
The exact sequence depends on the reviewing authority and the property, but these are the usual stages from the first call through the agency-ready work product.
01
Confirm jurisdiction and sewer status
We start with the address or APN, city or County boundary, sewer availability, proposed use, bedroom count, and any agency direction already received.
02
Lay out realistic test areas
The proposed home, grading, access, wells, drainage, setbacks, and future replacement field are reviewed so testing represents buildable primary and reserve areas.
03
Coordinate notice and excavation
The required agency notice, test-hole locations, excavation method, access, water, and field schedule are established before holes are opened.
04
Measure infiltration and document soil
Percolation readings follow the applicable procedure while soil layers, limiting conditions, groundwater evidence, and site observations are recorded.
05
Prepare the report and design basis
Field data, maps, calculations, photographs, conclusions, and the proposed design rate are assembled for agency review and later OWTS layout or design.
Site review
Information that can control an OWTS layout
A passing test result is only one part of septic planning. The proposed disposal area also has to fit the parcel, meet separation requirements, and preserve an acceptable replacement area when required.
Testing scope and system design should be confirmed against current agency requirements before excavation or construction begins.
Correct parcel, proposed land use, bedroom count or design flow, and responsible reviewing agency
Representative primary and 100-percent replacement areas that remain available after development
Measured percolation behavior plus soil logs at the proposed dispersal depth
Highest known groundwater, bedrock or restrictive layers, fill, drainage, flood features, and slope
Setbacks to wells, water lines, structures, property lines, trees, streams, rivers, lakes, and other OWTS
Consistency between the tested depths, proposed grading, disposal layout, and construction plan
Colorado River distance, floodplain and historic channels, groundwater elevation, wells, and tribal or federal land status
If the site is constrained
Possible paths after field testing
Field results do not automatically choose a system. They help establish the conditions that the engineer, property owner, and reviewing agency must work with.
01
Conventional leach field
Where the rate, soil profile, separation, setbacks, slope, and available area work together, the results may support a conventional trench or approved chamber layout.
02
Move or resize the disposal area
A different part of the parcel, a larger absorption area, revised grading, or a reorganized building plan may resolve a localized slow layer, rock, drainage feature, or setback conflict.
03
Engineered treatment or dispersal
Supplemental treatment, pressure distribution, a mound, drip dispersal, or another alternative may be considered only when the reviewing authority accepts it for the documented site conditions.
04
Reconsider the development plan
If sewer connection is required or the parcel cannot support a compliant primary and reserve area, the practical answer may be connection, reduced flow, fewer bedrooms, or a different site layout.
Property-owner questions
Percolation testing in Rice
Who reviews septic and percolation work in Rice?+
The applicable city or San Bernardino County OWTS authority is the primary authority identified for this service area. The reviewing agency and required submittals should still be confirmed for the parcel before field work because jurisdiction, project type, and site history can affect the process.
Can Calicore predict the percolation rate for a Rice property before testing?+
No map or nearby result can establish the rate for a specific absorption area. Published soil and geologic information can help plan the investigation, but field observations and testing at the proposed location determine the result used for design.
What should I send before scheduling?+
Send the parcel address or APN, any site or grading plan, the proposed building use, available well and septic records, and agency comments you have received. If you only have contact information, Calicore can help identify the next step.
Does a passing perc test guarantee a San Bernardino County septic permit?+
No. The measured rate is one part of the review. The authority also evaluates the soil profile, groundwater and bedrock separation, slopes, setbacks, sewer availability, proposed flow, primary layout, replacement area, and other parcel-specific constraints.
Verify current requirements
Official permitting references
These agency sources are provided for project planning. Requirements can change, and the current process should be confirmed for the specific parcel and proposed development.
Send the address or APN and whatever information you already have. Calicore can help identify the likely testing, planning, and submittal steps for your Rice project.