San Bernardino County · Lower Colorado River and Eastern Desert

Septic soil testing in Rice, California

Soil testing for septic systems in Rice, including parcel-specific percolation testing, soil-profile observations, and design-rate documentation. Laboratory classification tests can be scoped when project conditions call for them.

Discuss this property Call (951) 345-3509

Local project context

Soil and percolation testing for Rice septic projects

Rice is a very small, remote desert locality at a former rail and highway junction west of the Colorado River corridor.

Sparse development, dry-lake and fan deposits, abandoned infrastructure, water-source feasibility, and long mobilization distances dominate project planning.

Septic soil testing is useful only when the field locations represent the proposed disposal area. Surface appearance, a regional soil map, or a result from a nearby parcel cannot establish the absorption rate or soil conditions for this site.

Jurisdiction and sewer service

Confirm the review path before field work

Rice is recognized in the Countywide Plan's East Desert group but has no municipal government or Census-place boundary.

Jurisdiction depends on the parcel. County EHS is the technical-review agency for unincorporated County work, while incorporated projects begin with the applicable city and may involve County EHS, a sewer district, and a Regional Water Board. For County-reviewed work, current LAMP and percolation-report requirements should be confirmed with the agency for the specific parcel.

Check the reviewing agency

01
Verify whether the parcel is in an incorporated city or unincorporated County area.
02
Confirm whether a public sewer connection is available or required before planning an onsite wastewater treatment system.
03
Confirm the accepted test procedure, notification, field locations, profile depth, and report format with the reviewing authority.

Field investigation and reporting

How septic soil testing is planned in Rice

The field program should answer the questions the designer and reviewing agency need resolved for this parcel.

01
Check what the parcel and agency require
Confirm the address or APN, proposed use, available sewer service, reviewing authority, existing septic records, and any testing instructions before selecting field locations.
02
Tie test points to the proposed layout
Place testing in the proposed primary and replacement dispersal areas where possible, accounting for building plans, grading, access, wells, drainage, slopes, and setbacks.
03
Document absorption and the soil profile
Perform the applicable percolation procedure and record soil layers and limiting conditions relevant to the proposed dispersal depth and local review.
04
Report usable design information
Compile field observations, test data, mapping, photographs, calculations, and the design-rate basis so the engineer and reviewing agency can evaluate the proposed OWTS.

Parcel-specific scope

Soil and field information to document

A percolation test is part of a soil evaluation, not a guarantee of approval. The proposed primary and replacement areas, subsurface conditions, and current agency criteria all matter.

When classification data is needed, laboratory tests such as sieve analysis, Atterberg limits, and moisture content can be selected for the material and design question.

Very sparse development
Abandoned infrastructure
Water-source feasibility
Dry-lake and fan deposits
Correct parcel, proposed land use, bedroom count or design flow, and responsible reviewing agency
Representative primary and 100-percent replacement areas that remain available after development
Measured percolation behavior plus soil logs at the proposed dispersal depth
Highest known groundwater, bedrock or restrictive layers, fill, drainage, flood features, and slope

Property-owner questions

Septic soil testing in Rice

What does septic soil testing in Rice include?+

The field scope is set for the parcel and current agency requirements. It may include percolation testing in proposed disposal areas, soil-profile observations, documentation of restrictive conditions, and a report that connects the field findings to septic-system planning.

Can a nearby Rice perc report predict my property's result?+

No. Soil and site conditions can change across short distances. Nearby records can help plan the investigation, but representative testing and observations at the proposed disposal area establish the parcel-specific design basis.

Can laboratory soil classification be added?+

When the project needs additional classification data, laboratory work such as sieve analysis, Atterberg limits, or moisture-content testing can be scoped with the field program. The engineer selects tests based on the material and the question being evaluated.

Primary sources

San Bernardino County wastewater references

Use the current agency documents for planning, and confirm requirements for the parcel, proposed system, and responsible jurisdiction.

Wastewater and land-use program San Bernardino County Environmental Health Services
Local Agency Management Program San Bernardino County — County OWTS siting, design, operation, and management program.
Percolation Testing and Reporting Standards San Bernardino County — Field procedures and report requirements currently linked by EHS.
Onsite Wastewater Treatment Systems bulletin IB-00018 San Bernardino County Land Use Services — Construction-facing bulletin updated July 30, 2026.
Water Quality Control Policy for Siting, Design, Operation and Maintenance of OWTS California State Water Resources Control Board

Related local services

Continue the septic project from testing through design.

Percolation testing in Rice Septic system design in Rice San Bernardino County septic design directory San Bernardino County soil testing directory

Start with the parcel

Get the scope right for your Rice project.

Send the address or APN, a site or grading plan if available, the proposed use, and any existing septic records or agency comments. Calicore can help identify the likely soil testing, percolation, or septic design step.

Ask about this property