I-35 Corridor · field soil resistivity surveys
New Braunfels has hot summers, intermittent heavy rainfall, and sharp moisture differences between river corridors and limestone uplands.
Local planning context
Limestone and karst, residual clay, Guadalupe and Comal river deposits, terrace alluvium, and rapid-growth development fill may occur.
That context helps a New Braunfels project team select stations, line directions, and electrode spacings. It does not establish a parcel-wide electrical resistivity or a corrosion rate. Each result belongs to the documented array and field condition.
Evidence to action
Regional maps and climate records are reconnaissance tools. The project plan still has to represent the actual alignment, earthwork, materials, and construction stage.
New Braunfels has hot summers, intermittent heavy rainfall, and sharp moisture differences between river corridors and limestone uplands.
Record rainfall, irrigation, surface moisture, frost, and construction condition at each station.Limestone and karst, residual clay, Guadalupe and Comal river deposits, terrace alluvium, and rapid-growth development fill may occur.
Separate native ground, cuts, fills, and materially different route segments in the station plan.Manufacturing, distribution, water infrastructure, healthcare, data/commercial campuses, and utility expansion drive local work.
Tie each array to the substation, collector system, route, facility, or buried asset it is intended to inform.Shallow rock, springs and recharge features, floodplain access, active construction, and tourism traffic require early route and schedule planning.
Reserve straight, utility-cleared lines and document conductive features that cannot be avoided.Array to dataset
Four electrodes are placed in a straight line at equal spacing. The instrument introduces current through the two outer electrodes and measures voltage between the two inner electrodes. The measured resistance and array geometry are used to calculate apparent soil electrical resistivity.
The crew repeats readings at planned spacings, stations, and orientations. Increasing spacing samples a larger earth volume, but spacing is not an exact depth. Layered ground, buried metal, grounding conductors, overhead lines, limited geometry, contact resistance, and electrical noise can affect the response.
Calicore reports station coordinates, alignment, spacing, measured resistance, calculated apparent resistivity, units, current field condition, photographs, deviations, and limitations. ASTM G57-20 and IEEE 81-2025 are common technical starting points; the project specification and receiving engineer control the final scope.
Local project uses
Each application needs a station and spacing plan matched to the earth model, asset, and receiving engineer's decision.
A field program can place repeatable stations and spacings around this New Braunfels application while documenting local geometry and interference.
A field program can place repeatable stations and spacings around this New Braunfels application while documenting local geometry and interference.
A field program can place repeatable stations and spacings around this New Braunfels application while documenting local geometry and interference.
Before requesting a proposal
Similar name, different property
Wenner testing measures apparent electrical resistivity for grounding and corrosion work. Thermal resistivity describes resistance to heat flow around buried power systems.
View New Braunfels thermal resistivity testingFrequently asked
No defensible parcel or route value comes from the city name. Limestone and karst, residual clay, Guadalupe and Comal river deposits, terrace alluvium, and rapid-growth development fill may occur. A Wenner survey measures apparent resistivity for the documented array, location, spacing, orientation, and field condition.
The receiving grounding or corrosion engineer's objective, desired earth-model coverage, site dimensions, anticipated layering, and interference constraints determine the spacing sequence. Spacing is not treated as an exact one-to-one test depth.
Shallow rock, springs and recharge features, floodplain access, active construction, and tourism traffic require early route and schedule planning. Candidate lines, utility clearance, access, surface conditions, buried metal, overhead conductors, grounding systems, and work windows should be reviewed before mobilization.
Manufacturing, distribution, water infrastructure, healthcare, data/commercial campuses, and utility expansion drive local work. Common survey uses include industrial grounding grids, water-facility grounding, new-substation surveys. The data can support a grounding or corrosion evaluation but is not itself a grounding-grid or cathodic-protection design.
Primary planning references
Regional mapping guides field planning only. It does not supply a parcel-specific thermal rho, soil electrical resistivity, corrosion rate, or engineering design value.
New Braunfels, TX project support
Send the site plan, survey objective, proposed stations and spacings, access and utility-clearance details, and schedule. Calicore can help turn an open-ended request into a practical field scope.
Request a proposal